Williams 12 String Tone Bars:

The Williams tone bar is made of 440 stainless steel, hardened to Rockwell 62, then centerless ground to 6 microns, and finally polished to a high luster. The result is a tone bar that has virtually no drag for smooth gliding. The Williams tone bars are preferred by Wayne Dahl (Martina McBride), Bruce Boughton, Tommy Hannum, and many others.

Williams Needle Oiler:

The Williams needle oiler has a 2 oz. bottle, with Teflon lubricant, and has a 2.5" needle to get into those hard to reach places! A rubber cap is provided to prevent leakage. The Williams needle olier makes maintaining your pedal steel quick and easy. The oiler has a variety of other uses too!

Williams Adjustable Legs:

The Williams legs consist of a 1/2-13 thread (industry standard), made of bright stainless steel, 7/8"-27 clutch thread (industry standard). Available in three lengths:25", 26"(standard height), and 27". If you require a custom length, please contact us.

Williams Leg Tips:

The Williams leg tips have a 5/8 " inner diameter (industry standard) and will fit most pedal steel guitars. The Williams leg tips are made of durable rubber and will help keep your guitar steady! Sold in packs of four.

Williams Leg Bag:

The Williams leg bag is made of high quality durable marine nylon material, and is hemmed & lined with five divisions to accommodate 4 legs and pedal rods. The lined material, will help prevent legs and pull rods from getting scratched. The Williams leg bag will accommodate nearly any leg length.

Williams Guitar Cover:

The Williams guitar cover is a great way to keep dust off your axe! Likewise, it will help to protect your Williams during gig breaks. The covers are available for all Williams guitar bodies.

Williams Side-Mount Ball Coupler:

The Williams Side-Mount Ball Coupler has standard 10-32 thread, nickel plated, and will not tarnish. This coupler will not work on top-mount pedals. Sold individually.

Williams Volume Pedal Pot:

The Williams volume potentiometer has a logarithmic taper, is 500k Ohm, and will work as a replacement pot for nearly any make of volume pedal.

Williams Pull Train Kit:

The Williams Pull Train Kit includes one of each of the following: pull rod, bell crank, bell crank securing screw, tuning hex nut, tuning nut spacer, and rod retainer spring. When ordering, to determine rod length, please include the distance from the changer end to the cross shaft location. This can be done by measuring starting at the changer end plate, and pulling tape measure to the center of the shaft that you want to add the bell crank.

Williams Pedal Rod Numbers:

The Williams Pedal Rod numbers offer a quick easy way to reference which pedal rods go with each pedal. The pedal rod numbers install in seconds, and make set up a breeze! Sold in Sets: #1-4 or #1-9.

Williams Tuning Hex Nuts:

Industry standard replacement tuning nuts (3/16" hex). Fits 3/32" pull rods. Sold in packs of ten.

Williams Hex Nut Tuning Wrench:

The Williams 3/16" Hex Nut Tuning wrench is made of aluminum, and is nickel plated to prevent tuning nuts from discoloring. This "T-style" wrench is comfortable to grip. The Williams Hex Nut Tuning Wrench will work with most other makes of steel guitars.

Bill Lawrence USA 705 Reissue Pick Up:

The Bill Lawrence USA 705 Reissue, is a great pick up design featuring dual blade humbucker design which helps to eliminate noise and hum. The 705's have a nice warm and clear tone. A must have for anyone who does recording. Available in 10 string only.

Alumitone Pick Ups:

If clean, low noise, unbelievable string separation are important to you, then the Alumitone pick ups are for you! The Lace Alumitone will present the true natural tone of your guitar, provide sustain, and remain true under high gain. Pick ups are finished in chrome, and are available for both 10 and 12 string guitars. (Please click here for wiring diagram).

Steeler's Choice EZ Rider Seats (SK/Back):

The entire line of EZ Rider Seats will provide playing comfort, as well as, storage space for cables, volume pedal, strings, etc. Williams Guitar Company, LLC. will make arrangements to have the seat dropped shipped to you.

Prices vary depending on model. Please call for additional information.

Hilton Volume Pedal:

The Hilton Volume Pedal uses infrared scanning technology to control the volume level. No more noisy pot replacements! The Williams Guitar Company, LLC. can make arrangements to have a Hilton Volume Pedal dropped shipped to you.

Please call to order

Williams Tone Bar and Tuning Wrench Holder:

Help eliminate bar dings on your guitar with this sleek Williams leg clamp-on tone bar/tuning wrench holder. This holder will accommodate 1", 15/16" and 7/8" tone bars, and provides quick access to your tuning wrench. The holder is made of durable PVC. Only $10.00!

Dunlop Herco String winder:

This Dunlop string winder is the ideal string winding tool for the 700 Series shorter key heads! This tuning wrench has a shorter head on it which doesn't interfere with the tuning heads on either side of the tool. This string winder works well for other makes of guitar too! A must have item!

Williams Keyless "Top Hat" String Hold Down Screws:

3/16" hex string hold down screws for Williams keyless guitars. These replacement screws will allow Williams keyless guitar owners to use just one "T-style" wrench to re-string, tune the key head, and tune at the changer! Make your life simpler and pick up a set! Sold in packs of 10 and 12.